Description
Instructions:
Ensure your vehicle is clean, dry, and cool.
VEHICLE MUST NOT BE IN THE SUN WHEN APPLYING THIS PRODUCT
Ideally apply when vehicle is inside.
- Shake the bottle thoroughly before beginning application.
- Spray 2-3 pumps into an applicator or microfibre towel. This amount will be enough product for approximately half a panel.
- Wipe product on panel using a cross hatch pattern to ensure even coverage.
- Allow product to flash, this will usually happen in 1-2 minutes depending on temperature and humidity. The product will start to have a “rainbow” effect.
- With very light pressure wipe to level the coating with a clean microfibre cloth.
- Leave for 5 minutes. If you see any swirls or left over product still on the paint, wipe again with a clean microfibre towel.
APPLY ONE PANEL COMPLETELY AT A TIME - Leave product to cure fully, ideally 24hrs. Minimum cure time is 4-6 hours, do not let any water come in contact with coating during this time.
